Sondos Stone · Custom bathroom stone fabrication
Custom Stone Shower Benches, Curbs & Shelves in Greensboro, NC
Finish the shower with stone pieces made for the space. Sondos Stone fabricates shower bench tops, curb caps, niche shelves and coordinating bathroom details for projects in Greensboro, High Point, Winston-Salem and the surrounding Triad.
The details that bring the room together
One material can connect the seat, entry and shelves.
A stone cap gives a built-in bench its finished surface. A matching curb cap defines the shower entry, while smaller pieces finish a niche or wall ledge. Plan them together to coordinate the color, thickness, edges and pattern.
Send your shower drawing, tile selection and a list of the pieces you need. We'll review the material and fabrication details with your project requirements.
- 1 Bench top
- 2 Curb cap
- 3 Niche shelf
Custom pieces for a bathroom remodel
What would you like to finish in stone?
Shower bench tops
A fabricated cap fits over the planned bench base. Confirm the finished shape, depth, front edge, exposed ends and wall conditions. Rectangular and corner layouts need different drawings.
The stone surface and the supporting bench must be planned together. Floating seats or unsupported spans need a project-specific support design.
Shower curbs and thresholds
A curb cap covers the raised entry to the shower. Its width should relate to the completed assembly, including the adjacent finishes and approved edge detail.
Specify whether you mean a raised shower curb or a bathroom doorway threshold. The location, adjoining floor heights and intended use change the piece.
Niche shelves and wall caps
Smaller stone pieces can finish a recessed shelf, niche sill or half wall. List each one separately, including which sides and underside edges will remain visible.
For a dividing shelf, confirm the finished opening and installation sequence with the tile installer before the piece is cut.
Planning the whole bathroom? Include the vanity top when requesting the shower pieces. Our bathroom countertop service covers coordinated stone details, so the team can review the complete material layout.
Start with the exact material
Match the stone to the shower's use.
Bring the tile sample or product information and your vanity material preference. Review the selected surface for the specific wet-area application, desired finish and maintenance expectations.
If the project includes a steam shower, mention it before choosing the stone. Product suitability and installation requirements need a separate review for that environment.
Browse Sondos Stone materials- Quartz
- Consider consistent colors or patterns that coordinate with a quartz vanity. Confirm that the selected manufacturer's product is appropriate for the proposed shower application.
- Granite and quartzite
- Review the actual natural stone piece for pattern, usable dimensions and the required edge work. Care and sealing requirements depend on the selected stone and finish.
- Marble and other surfaces
- Discuss the appearance, finish and upkeep before specifying the material. Natural marble can be sensitive to acidic products; a stone's name alone does not establish its suitability for every shower detail.
- Matching multiple pieces
- Order the bench, curb and shelves as one group when you want them coordinated. A color name does not guarantee that separately sourced pieces will have identical patterns or shades.
The drawing makes the difference
Describe the finished piece, not just the framing.
Rough measurements help with an initial estimate. Final fabrication needs an approved drawing or template that accounts for the shower's finished construction and installation sequence. Label whether your measurements are rough, waterproofed or fully tiled dimensions.
Length, depth and shape
Show every piece separately. For a corner seat, an angled curb or an irregular opening, include a drawing that makes the shape clear. A single length does not describe the whole part.
Visible edges and thickness
Mark the edges that need finishing, including short returns and visible undersides. Discuss thickness, edge profile and any overhang with the actual support and adjoining tile in mind.
Tile and glass interfaces
Identify where wall tile meets the stone and where shower glass or hardware is planned. The stone, tile and glass teams should agree on the finished detail before fabrication and attachment work.
The stone cap is one part of the shower assembly. The shower contractor must coordinate the supporting base, drainage slope, waterproofing and connections with the selected system's requirements. Stone and sealer do not replace the waterproofing system.
Smaller pieces, complete layout
Can a remnant work for shower stone?
A suitable remnant may provide a bench top, curb cap or several smaller shelves. The useful question is whether that particular piece fits the entire approved layout and is suitable for the intended application.
A long, narrow curb may be harder to fit than its square footage suggests. If a matching bench and niche shelf are required, include them before selecting the piece. Pattern direction, thickness, condition and finished edges also matter.
Listed pieces are an online preview. Confirm availability, usable dimensions and material suitability with Sondos Stone.
What affects the quote
A small stone piece still needs custom fabrication.
The total depends on the selected material, the cutting layout, finished edges and how the pieces reach the project. Compare quotes for the same scope.
- Material and yield
- A long curb, matching bench and multiple shelves may need a larger usable piece than their combined square footage suggests.
- Shape and finishing
- Angles, notches, exposed ends, edge profiles and visible undersides affect fabrication work.
- Measurement and installation
- Confirm who supplies and approves final dimensions, whether site measurement is required, and which delivery or installation services are included.
- Pickup or contractor installation
- If your remodeler plans to install the pieces, say so when requesting the estimate. Ask whether fabrication-only or pickup arrangements are available for the project.
For homeowners, tile installers and remodelers
Send a piece list with your shower plan.
You can begin before every finish is selected. Tell us which decisions are final, which measurements are approximate and when your contractor expects the shower to be ready.
Example request
“Our bathroom remodel is in High Point. We need one rectangular bench top, one curb cap and two niche shelves to coordinate with the vanity. The tile is selected, but final dimensions are pending. Please quote the stone pieces and list installation separately.”
Illustrative inquiry, not a completed customer project.
Include these six details
- Project city or ZIP code and the best contact.
- Each piece's name, quantity and approximate dimensions.
- Photos or drawings showing the bench, entry and niches.
- Material preference and whether matching vanity stone is needed.
- Exposed edges, thickness preferences and any unusual shapes.
- Current construction stage, requested timing and installation arrangements.
Coordinate the stone with the remodel
Agree on the sequence before the pieces are cut.
A niche shelf installed during tile work and a cap fitted over completed surfaces may need different timing. Confirm the approach for each piece with your project team.
Explore the Sondos Stone processReview the layout
Identify the stone pieces, material, support approach and interfaces with tile or glass.
Confirm dimensions and readiness
Agree on the construction stage for measuring and on who approves the final piece drawings.
Fabricate the approved pieces
Complete the specified shapes and finished edges for the agreed layout.
Coordinate placement and finishing
Follow the agreed installation arrangements and the shower system's requirements. Confirm remaining tile, glass and finish work with the relevant trades.
Greensboro · High Point · Winston-Salem
Custom shower stone for Triad bathroom projects
If you're searching for shower bench tops or stone thresholds near you, send Sondos Stone your project location and piece list. We serve homeowners and project teams across the Triad, with the exact fabrication, delivery and installation scope confirmed for each job.
For a larger bathroom remodel, include your tile installer or contractor in the dimension and scheduling discussion. That helps align the stone order with the work already underway.
Questions before ordering
Shower bench, curb and shelf FAQs
Can Sondos Stone make a custom shower bench top?
Yes. Send the intended shape, approximate dimensions and project details. Final fabrication depends on the approved material, support arrangement and verified piece dimensions.
Does the stone bench top include the supporting bench?
A fabricated stone top is the finish piece. Confirm the supporting structure, waterproofing and installation scope separately with your contractor and the Sondos team.
Can the curb and shelves match my bathroom vanity?
That may be possible when the selected material and available layout allow it. Include every piece in the same request so color, pattern and material use can be reviewed together.
Can I use quartz in a shower?
Suitability depends on the exact product, application and installation requirements. Confirm the manufacturer's guidance for the selected quartz before ordering. Steam-shower use needs specific review.
Do I measure before or after the tile is installed?
Ask before measuring for fabrication. The answer depends on whether the piece is integrated during tile work or fitted against finished surfaces. Label rough dimensions clearly and agree on the final measurement stage.
Can a stone curb fix a leaking shower?
A new cap alone does not establish that a leak is repaired. Have the shower assembly and waterproofing evaluated before ordering a replacement piece, then coordinate any stone work with the repair plan.
Can you make only one shelf or curb cap?
Send the piece details for review. Material availability, usable dimensions, finishing and the requested installation or pickup arrangements determine whether and how the small order can be fulfilled.
How should I care for natural stone in the shower?
Use products approved for the specific stone and finish. The Natural Stone Institute recommends appropriate neutral cleaners and notes that sealing improves stain resistance without making stone stain-proof. Ask for the care instructions for your selected material.
Sondos Stone · NC Triad
Let's plan the stone details for your shower.
Share the bench, curb and shelf dimensions, your material preference and the project location. We'll help you establish the next step for the stone order.